![](https://mitek.ca/wp-content/uploads/2021/01/header-bg-black1.jpg)
BlackJack 3.0 Adjustable Support Columns are designed and tested to meet or exceed the CAN/CGSB-7.2-94 Adjustable Steel Columns standard.
Series: BJ30x96, BJ30x102, BJ30x108 and BJ30x120
Materials:
- BlackJack 3.0 Tube (3″ x 3″) – 10 gauge
Finish:
- Tube – Power Coated Black Paint
Installation:
- Ensure column is installed in a vertical and plumb position.
- Column base shall be aligned and secured to a proper supporting slab.
- Top plate shall cover the full width of the supported beam. Beam shall be centered on the top plate and continuous across the entire length of the plate.
- Square tube may be cut down, ensure cut is smooth, square and level.
- Turn threaded collar or threaded pipe to extend the column to the desired height.
- Maximum 4″ adjustment. Secure the top plate to wood beam with four (4) 1/4″ x 2″ lag screws.
Load Table:
![](https://mitek.ca/wp-content/uploads/2022/03/BJ30_Imperial.png?w=973)
BJ30 Imperial Load Table Download
![](https://mitek.ca/wp-content/uploads/2022/03/BJ30_Metric.png?w=973)
BJ30 Metric Load Table Download
![](https://mitek.ca/wp-content/uploads/2022/03/BlackJack30_without-plate.png?w=300)