Features
- Single joystick for simple operation
- Boost pressing cycle for extra large plates or hardwood
- Handles 2 X 4″ and 4 X 2″ with no adjustment
- J-slots in table with J-slot jigging (see Options)
Specifications
| Components | Gantry head and tables |
| Gantry head dimensions | 15′ 5″ L X 6′ 9″ W X 5′ 9″ H |
| Platen dimensions | 11′ 11″ L X 2′ W X 1-1/2″ H |
| Table dimensions | 40′ L X 10′ W X 2′ 11″ H (See Options) |
| Gantry head weight | 15,000 lbs |
| 40′ table weight | 28,000 lbs |
| 45′ table weight | 30,000 lbs |
| Hydraulic reservoir | 60 gallons |
| Hydraulic fluid | ISO 32 (customer supplied) |
| Platen material | Steel |
| Motor | 15 HP |
| Table working surface | Entire table top surface |
| Direction of travel | Left and right |
| Pressing capacity | 50 tons using Boost cycle |
| Pressing cycle | 1-1/2 seconds for a Normal cycle 1″ |
| Pressing height | to 5-3/4″, adjustable |
| Plate embedment | 100% |
| Travel speed | Up to 280 feet per minute |
| Controls | 4-position joystick and pushbuttons |
| Electrical Specs | 208/230/460/575 VAC, 60 Hz, 3-phase |
| FLA plus control amps | 45.4/42.4/21.1/18.9 amps |
| Disconnect protection | 60/60/40/30 amps |
| E-stops | Pushbutton and Area scanners |
| Safety compliance | UL (panels), OSHA |
- 45′ table length and other lengths available
- T-slots in table for standard Tekset™ jigging
- Pneumatic floor jigging
Opens in a new window
Opens an external site
Opens an external site in a new window
