PKA – Plate Kit A
RedJack and BlackJack Adjustable Support Columns are designed and tested to meet or exceed the CAN/CGSB-7.2-94 Adjustable Steel Columns standard.
Series: RJ25x96, RJ25x102, RJ25x108, RJ25x120, BJ30x96, BJ30x102, BJ30x108, BJ30x120, RJ30x90, RJ30x96, RJ30x102, RJ30x108, RJ30x114, RJ30x120 and RJ30x144
- A plate (3-1/2″ x 5-1/4″) – 3 gauge
- PL plate (4-1/2″ x 6″) – 3 gauge
- A plate and PL plate – Grey Primer Paint
- Ensure column is installed in a vertical and plumb position.
- Top plate shall cover the full width of the supported beam. Beam shall be centered on the top plate and continuous across the entire length of the plate.
- Secure the top plate to wood beam with four (4) 1/4″ x 2″ lag screws.
Plates included in each plate kit: